Latest Products Latest Products Tue, 11 May 2021 14:24:16 +0530 en-us Air Dryers Wed, 28 Mar 2018 00:00:00 +0530 Refrigerated Air Dryer Air Dryers Wed, 28 Mar 2018 00:00:00 +0530 We provide with the latest and very high quality Refrigerated Air Dryer which is a skid mounted unit consisting of Freon chiller, Air to Air Pre-Cooler and a Moisture Separator. We offer Refrigerated Type Air Dryers made up of the best quality parts and we also provide them within the stipulated time. We are one of the trustworthy Compressed Air Dryer Manufacturers and Suppliers in India. It is a skid-mounted unit consisting of Freon chiller, Air to Air pre-Cooler and a moisture separator. First Air is pre-cooled with outgoing chilled air to around 25oC and then it is cooled in a Freon Chiller to ( ) 2oC temperature. This reduces refrigeration load of the Unit. Outgoing dry air has ( ) 2oC Pressure Dew Point and comes out at around 25oC temperature. ( ) 2oC Dew Point in Refrigerated Air Dryers corresponds to around (-) 23oC Atmospheric Pressure Dew Point. Lower Dew Point is not possible from Refrigerated Dryer, as moisture condensed would start freezing on Freon tubes, if lower dew points are tried. (-) 23oC is the best possible Dew Point achievable from Refrigerated Air Dryers. Heat of Compression Dryers Air Dryers Thu, 05 Apr 2018 00:00:00 +0530 We are amongst the reliable Heat of Compression Type Dryers Manufacturers and Suppliers. Our Heat of Compression Dryers have a very low maintenance cost as there is no moving part. There is no loss of compressed air in our dryers and are also skid mounted and can be easily installed. The Heat Of Compression Dryer (HOC) is fully automatic with pneumatically actuated Ball / Plug valves. A sequence timer controls operation of these valves. Desiccant used is Activated Alumina and it dries the air up to (-) 400 C Dew point. Advantage of HOC Dryer : Maintenance cost is very-very low because there is no moving part, no blower and no continuous requirement of Electrical heater. Life of activated alumina around 5 year. No loss of compressed Air. Pressure drop across dryer is max. 0.2 kg/cm2 Skid mounted and ready to install Dew point is (-) 40oC. Air Compressor Wed, 28 Mar 2018 00:00:00 +0530 We offer optimal quality Air Compressors which are available nowhere else. Our Air Compressors are highly famous across the globe for their accuracy and efficiency. We manufacture these Air Compressors under strict quality control so that they are of good quality and just according to the international standards. Our range of Industrial Air Compressor comprises of Pressure Air Compressor etc. We offer these Air Compressors at reasonable rates and deliver them in a timely manner. We are one of the genuine Air Compressor Exporters and well known Suppliers in India. Cooling Tower Wed, 28 Mar 2018 00:00:00 +0530 When it comes to Cooling Towers, there are only a few alternatives to us. We offer the best quality Industrial Cooling Tower which is highly demanded all over. We also offer Water Cooling Tower which also has a large demand in the global market. We manufacture our Cooling Towers under best manufacturing conditions. Our Cooling Towers can be availed at affordable prices which is not a burden on your budget. We have become one of the preferred FRP Cooling Tower Manufacturers and Suppliers in India. PSA Nitrogen Gas Plant Wed, 28 Mar 2018 00:00:00 +0530 Bulk Drug :Nitrogen is widely used to provide blanket covering thus avoiding any explosions during chemical processing and storage. Further Nitrogen also prevents oxidation of reactive chemicals. Pharmaceuticals :In Pharmaceuticals formulation and packaging plants, Nitrogen protective atmosphere is critical to preserve purity and potency of drug being filled in the ampoules and vials . While Oxygen is invariably used in an ampoule filling and sealing machine. Heatless Air Dryer Thu, 05 Apr 2018 00:00:00 +0530 To handle both automated inbound and outbound orders, we have exceptional warehousing solutions. We keep the wide array of products sorted in the warehouse to make sure that the delivery commences systematically. Notable name in this field, we successfully cater to the demands of our clientele from Ghaziabad(India) to every nook and corner. Activated Alumina Balls Thu, 05 Apr 2018 00:00:00 +0530 Activated alumina Balls is a filter media made by treating aluminum ore so that it becomes porous and highly adsorptive. Activated alumina will remove a variety of contaminants including excessive fluoride, arsenic and selenium. The medium requires periodic cleaning with an appropriate regenerate such as alum or acid in order to remain effective.   A white or slightly red particle, ball-shaped or roll-shaped, activated alumina is insoluble in water and organic solvent, soluble in strong acids and alkalis, odorless, tasteless and non-toxic.   Application Catalyst for recovering sulfur in the petrochemical industry Excellent defluorination agent for drinking water and for recycling alkyl-hydrocarbon in alkylbenzene production Reclaiming agent for de-acidic in transformer oil, and de-arsenic agent in the acid industry Adsorbent in the production of hydrogen peroxide solution Catalyst for polyhydro-ammonia by substituting silica gel with ball-shaped product Desiccator and purifying agent Carbon Molecular Sieves Thu, 05 Apr 2018 00:00:00 +0530 The carbon molecular sieve (CMS) is a new no polar absorbent with adsorbing oxygen molecule to get nitrogen-enriched air at normal temperature. The ability of separating the air decided by propagation rate, adsorptive attraction or the same effect of each gas in carbon molecular sieve pore. The carbon molecular sieve is widely applied in petroleum chemical industry, the heat treatment of metal, the electronic manufacture and food preservation industries.   A process for producing carbon molecular sieves for the separation of oxygen from air, whereby finely ground char coal particles are after the addition of coal tar, coal tar pitch as binders and carbonized at temperatures of 600°-900° C. Our CMS products have the character of large nitrogen yield capacity; high nitrogen recovery. It can meet the requirement of all types of PSA nitrogen systems. Ceramic Balls Thu, 05 Apr 2018 00:00:00 +0530 Like plastics and other non-metals, ceramic balls are available in a host of compositions and formulations. This data sheet covers many of the general properties shared by ceramic balls, and lists specific characteristics of different materials.   General Characteristics : As a rule, ceramic balls resist corrosion and abrasion extremely well. They also have low thermal conductivity, and a high resistance to heat. Ruby sapphire material can withstand extended exposure to temperatures in excess of 3250°F. These qualities make ceramic balls useful for flow control, metering, and bearing applications. Diaphragm Valve Thu, 05 Apr 2018 00:00:00 +0530 Our range of diaphragm valves provide excellent sealing and isolation characteristics to contain fluid being controlled and prevent migration of the controlled fluid into the valve mechanisms or out of the valve. Diaphragm valves utilize a resilient diaphragm and a valve shoulder to engage a valve seat and prevent the flow of fluid past the valve seat.   It is needless to say that they could be used for handling air, water and normal liquid/gas flow as well. It is the most ideal valve to handle fluids that require high purity and should remain free from contamination.   There are two main categories of diaphragm valves: one type seals over a "weir" (saddle) and the other (sometimes called a "straight-way" valve) seals over a seat. The main difference is that a saddle-type valve has its two ports in line with each other on the opposite sides of the valve, whereas the seat-type has the in/out ports located at a 90 degree angle from one another. The saddle type is the most common in process applications and the seat-type is more commonly used as a tank bottom valve but exists also as a process valve. While diaphragm valves usually come in two-port forms, they can also come with three ports and even more. When more than three ports are included, they generally require more than one diaphragm; however, special dual actuators can handle more ports with one membrane. Filter Element Thu, 12 Apr 2018 00:00:00 +0530 Compressed Air and Gas Filters being manufactured are best Tested for simultaneous mechanical separation of liquid droplets and of solid dust from compressed gases.   Tested with oil mist, these filters will have to be followed by adsorber units which have the double function of removing the remaining mist particles and of adsorbing the dissolved gases and vapours. Such "Adsorbers" contain granular adsorption media, usually activated carbon or silica gel. The granules nearer to depth filter and liquid mist particles, meanwhile the further granules adsorb the dissolved vapours. Flanges according to ASA-150 RT Ceramic filter cylinders of grain size 120. All sizes are supplied with separately packed carbon except the In-Line Adsorber , which is supplied with filled-in carbon. Pilot Solenoid Valve Thu, 12 Apr 2018 00:00:00 +0530 These are devices that are used to operate larger compressed air valves. Pilot Solenoid Valve is constructed and arranged to provide reduced operating noise and decreased armature wear as the armature reciprocates within a bore in response to solenoid energization and de-energization. The armature contains an elastomeric valve head that is based normally closed against the valve seat. When the solenoid assembly is energized, the armature is retracted. The armature's momentum is initially absorbed by the elastomeric valve head making contact with the solenoid assembly at one end of the bore. Final absorption of the armature's momentum is shared by continuing contact of the valve head with the solenoid assembly and by an elastomeric limit stop that is disposed between the armature and the stator. In this way the elastomeric limit stop is not required to absorb the full momentum of the retracting armature.   Detailed Description Internal Pilot / External Pilot / Pilot Valves Normally closed / Normally open / Mixing / Diverting External piloting for low pressure media, Mixing and Diverting applications. Pressure Regulating Valve Thu, 05 Apr 2018 00:00:00 +0530 The Pressure Reducing and Regulating Valve automatically reduces a high inlet pressure to a lower delivery pressure and maintains the lower pressure within acceptable limits.   Features And Benefits Automatically reduces a high inlet pressure to a lower delivery pressure: Maintains a lower pressure within reasonably close limits. Every valve is tested through a range of tests prior to shipping - Specify and install with confidence. High capacities for higher quality installations - Handles more volume with just one regulator.   Other Details A pressure reducing valve shall be installed to deliver water at a controlled pressure. The valve shall be ASSE 1003 and IAPMO listed. The valve shall be a bronze body with a maximum inlet pressure of 300 psi. The valve shall be a yoke-type design with a buna seat disc and a stainless steel body seat. Psa Nitrogen Gas Generators Thu, 05 Apr 2018 00:00:00 +0530 These PSA Nitrogen Gas Generators are based on PSA technology i.e. Pressure Swing Adsorption. The PSA Nitrogen Gas Generation Plants are economical, reliable, durable and user friendly. They are fully automatic, self contained and ready to install. They also have a low generation and maintenance cost. We supply our products to industries such as Metallurgical Industry, Synthetic & Fiber Industry, Chemical Industries, Food Packaging Industries, Pharmaceutical Industry, Optical industry, Electronic Industry etc. We have also become one of the reliable PSA Nitrogen Gas Generation Plants Manufacturers in India. Our nitrogen gas generator is based on P.S.A Technology and that is called PRESSURE SWING ADSORPTION. Nitrogen Gas Generation : The main ingredient of Nitrogen Plant is CMS (CARBON MOLECULER SIEVE) and CMS is having indefinite pores on the surface, which adsorb the molecules of Oxygen, Moisture and Unwanted gases from compressed air. Nitrogen gas, which is not adsorbed into the surface of CMS comes out from adsorbed tower and collects in the surge vessel. Nitrogen Generator PEE Model This is very simple Model for producing the Commercial grade of Nitrogen with its Purity of 99% and very economical. This Model is suitable up to 99.9% Purity. DX Model This Model is used as High Purity Nitrogen plant wherein the purity level is 1-2 PPM. This type of Plant is used where Hydrogen contents are required. This plant is Commonly used for Heat treatment, Chemical and Electronics industries. Copper  DX This Model is used as Ultra Pure Nitrogen Plant and its Purity level is 1PPM (max). This is used where Nitrogen gas is required, free from Oxygen and Hydrogen. This Model is Commonly used in Optical cable, Electronic and Synthetic Fiber Industries. Advantage Of P. S. A. Nitrogen Plant P.S.A Plant is Reliable, Economical, Durable and user friendly. Fully Automatic  No special operator required. Low generation Cost Pay Back period within one year. Self Contained unit and ready to install. Consistency of Purity and no hassles of Nitrogen Cylinder. Maintenance cost is very low.Minimum life of CMS is 10-12 year. Application of Nirogen GAS Metallurgical Industry Synthetic & Fiber Industry Chemical Industries Food Packaging Industries Pharmaceutical Industry Optical industryElectronic Industry Psa Oxygen Gas Generators Thu, 05 Apr 2018 00:00:00 +0530 Our PSA Oxygen Gas Generators are economical, reliable, durable and user friendly. The PSA Oxygen Generators that we supply are fully automatic and also have a low generation cost. These are a self contained, ready to install units with a low maintenance cost. These generators are required in industries such as Glass Industry, Steel Industry, Brazing Industry etc. We are also one of the reliable PSA O2 Gas Generators Manufacturers & Exporters from India. Our oxygen gas generators based on P.S.A Technology and that is called â��PRESSURE SWING ADSORPTIONâ��â��. The main ingredient of Oxygen Plant is ZMS (ZEOLITE MOLECULAR SIEVE) and ZMS is having indefinite pores on the surface, which adsorb the molecules of Nitrogen, Moisture and Unwanted gases from compressed air. Oxygen gas, which is not adsorbed into the surface of ZMS comes out from adsorbed tower and collects in the surge vessel. It consists of two-adsorber tower, which is filled with Molecular Sieves. The adsorber towers are interconnected with Change over Control valves, controlled by sequence timer with a standard time cycle. After every certain time cycle adsorbed tower, automatically swings and Oxygen gas is produced continuously. The maximum Oxygen purity level is 93-95% Advantage Economical, Durable and user friendly. Fully Automatic â�� No special Operator required. Low generation Cost â�� Pay Back period within one year. Self contained unit and ready to install. Consistency of Purity and no hassles of Oxygen Cylinder. Maintenance cost is very low. Minimum life of ZMS is 10-12 year. Application of Oxygen Glass Industry Steel Industry Brazing Industry Ampoules and vials Manufacturing T.V. Picture Tube Manufacturing Industry Hospitals Water Treatment and Fish Farming Chemicals and Petrochemicals PSA Gas Generator Thu, 05 Apr 2018 00:00:00 +0530 Psa Nitrogen gas generator : Steel Manufacturing Industry   PSA Gas Generators to provide inert /protective atmosphere required in following critical processes in steel industry. Annealing of cold rolled strips Galvanizing of strips to make G.I /G.P sheets Hardening / Tempering / Normalizing / Annealing of various components made out of different grades of steel. Nitrogen Gas Generator Thu, 05 Apr 2018 00:00:00 +0530 PSA Gas Generators are used to produce Nitrogen which is filled in a wide variety of food products .The inert gas when filled in a pack allows it to retain its contents in original fresh condition by avoiding its contact with air/moisture.Further manufacturers of edible oils need to use nitrogen in storage & packaging processes. Nitrogen is essentially required in food packaging for Milk Powders to eliminate its deterioration due to moisture exposure. Air is composed of 78% Nitrogen and 21% Oxygen. PSA Nitrogen generation technology works on the principle of air separation by adsorbing Oxygen and separating Nitrogen. Pressure Swing Adsorption (PSA Nitrogen) process comprises of 2 vessels filled with Carbon Molecular Sieves (CMS). (see image below for detail of vessels).Step 1 : AdsorptionPrefiltered compressed air is passed through one CMS filled vessel. Oxygen is adsorbed by the CMS and Nitrogen comes out as the product gas. After some time of operation, the CMS inside this vessel gets saturated with Oxygen and can no longer adsorb.Step 2 : DesorptionUpon saturation of the CMS in the vessel, the process switches nitrogen generation to the other vessel, while allowing the saturated bed start the process of desorption and regeneration. The waste gas (oxygen, carbon dioxide, etc.) is discharged into atmosphere.Step 3 : RegenerationIn order to regenerate the CMS in the vessel, part of the Nitrogen produced by the other tower is  purged into this tower. This allows for quick regeneration of the CMS and to make it available for  production in the next cycle.The cyclical nature of the process between the two vessels ensures continuous production of pure  nitrogen.Oxygen Purity :Purity from 98% to 99.99% is possible directly with a simple PSA unit. We recommend using our DX or Copper-DX models for higher guaranteed purity levels up to 99.9999%.