|Orifice||6mm - 80mm|
|Pressure range||1.0 - 70bar (Internal Pilot Operated)|
|Suitable for||Air, Water, Inert gases, Clear Liquids and Fuel gases|
These are devices that are used to operate larger compressed air valves. Pilot Solenoid Valve is constructed and arranged to provide reduced operating noise and decreased armature wear as the armature reciprocates within a bore in response to solenoid energization and de-energization. The armature contains an elastomeric valve head that is based normally closed against the valve seat. When the solenoid assembly is energized, the armature is retracted. The armature's momentum is initially absorbed by the elastomeric valve head making contact with the solenoid assembly at one end of the bore. Final absorption of the armature's momentum is shared by continuing contact of the valve head with the solenoid assembly and by an elastomeric limit stop that is disposed between the armature and the stator. In this way the elastomeric limit stop is not required to absorb the full momentum of the retracting armature.
Internal Pilot / External Pilot / Pilot Valves Normally closed / Normally open / Mixing / Diverting
External piloting for low pressure media, Mixing and Diverting applications.